Kent Plumbing Supplies
Extended Area Delivery Charges
Delivery charges vary depending on your location. There are certain areas and postcodes that will receive an extended area delivery charge - this is due to delivery companies charging an additional charge to these areas. If your delivery location will incur a further cost to that paid for when ordering, we will contact you shortly after to discuss. Please don't forget you can collect from store free of charge!
KBS005 - 10 Bar Pressure & Temperature Relief Valve - 3/4"MBSPx22mm - 95mm Probe
The new compact pressure and temperature relief valve has been designed to provide protection against over pressurisation, which can occur within an Unvented Hot Water system if the input temperature controls fail. The valve is designed to be fitted in the upper portion of the cylinder as this is where the hottest system temperatures will be found. If the system temperature rises beyond 90° C, the wax mixture within the element of the temperature probe will expand and this will lift the valve off its seat and relieve water to waste and therefore reduce the pressure inside the cylinder. If the water pressure increases (without temperature increase) the valve will stay closed until the set pressure of the relief mechanism is reached, at which point the valve will open to relieve the excess pressure build-up.
- 3/4" MBSP Threaded (Inlet) x 22mm Compression (Outlet) connections
- Cartridge construction provides long life span and service of the valve
- Locked Pressure Setting: 10.0 bar
- Temperature Relief: 90-95°C
- Discharge capacity: 25Kw
- Probe Length: 95mm
- WRAS Approved